Default: [Active]
IPsec
Specify the machine's IPsec function Active/Not Active.
Default: [Off]
MAC Address
Displays the machine's MAC address (physical address).
Ethernet Speed
Set the access speed for networks.
Select a speed that matches your network environment. [Auto Select] should usually be
selected.
Default: [Auto Select]
Prmt SNMPv3 Com
Select SNMPv3 communication for managing the machine using MIB.
Default: [Ciphertext]
Pmt SSL/TLS Com
Set SSL/TLS communication under IPv4 and IPv6 to [Active] or [Not Active]. This
communication mode will be used when you specify machine settings using a Web browser.
Default: [Active]
Restore Default
You can reset the network settings to their defaults.
Wireless LAN
Configure settings for wireless LAN.
SSID
You can display or specify an SSID.
Security Method
You can specify the encryption of the wireless LAN.
Default: [Not Active]
Easy Setup
Select [Easy Setup] if you want to configure wireless LAN settings using Wi-Fi Protected Setup
(WPS). Select either [PBC Method] or [PIN Method] that is correct to network connection via
the access points you can use.
MAC Address
You can display the wireless LAN's MAC address (physical address).
Using the [Host Interface] Menu
151