Mapping - KTI Networks KGS-0841-W User Manual

Note:
802.1p classification is superior over DSCP classification if both are enabled. That means if a received packet
is classified successfully in 802.1p classification, the classified priority class is used directly for the packet and
the result of DSCP classification is ignored.
4.12.2 802.1p Mapping
___________________________________________________________________________________________________________________________________________________
Configuration
___________________________________________________________________________________________________________________________________________________
Port n
tag m
Priority class
___________________________________________________________________________________________________________________________________________________
[Apply]
[Refresh]
[Back]
___________________________________________________________________________________________________________________________________________________
Every ingress port has its own 802.1p mapping table. The table is referred in 802.1p priority classification for
the received packet.
Description
Port number n
3-bit User priority tag value m ( range : 0 ~ 7 )
Mapped priority class for tag m on Port n
Class 3 ~ Class 0
Click to apply the configuration change
Click to refresh current configuration
Click to go back to upper menu
-94-