Table of Contents
Advertisement
Figure 46 Advanced Application > VLAN > VLAN Detail
The following table describes the labels in this screen.
Table 32 Advanced Application > VLAN > VLAN Detail
LABEL
DESCRIPTION
VLAN Status
Click this to go to the VLAN Status screen.
VID
This is the VLAN identification number that was configured in the Static VLAN screen.
Port Number
This column displays the ports that are participating in a VLAN. A tagged port is marked as
T, an untagged port is marked as U and ports not participating in a VLAN are marked as "–
".
Elapsed Time
This field shows how long it has been since a normal VLAN was registered or a static VLAN
was set up.
Status
This field shows how this VLAN was added to the Switch.
•
Dynamic - using GVRP
•
Static - manually added as a normal VLAN
•
Private - manually added as a private VLAN (primary, isolated or community)
•
Voice - manually added as a Voice VLAN
•
RMirror - manually added as a remote port mirroring VLAN
•
MVR - added via Multicast VLAN Registration (MVR)
Private VLAN
These fields show private VLAN information for the selected VLAN. See
Status
page 273
Primary VLAN This field shows the primary VLAN ID in the selected VLAN.
Secondary
This field shows the secondary VLAN ID in the selected VLAN.
VLAN
Type
This field shows the type of private VLAN: Primary, Community or Isolated.
Port List
This shows the ports mapped to the private VLAN using the Advanced Application >
Private VLAN or Advanced Application > VLAN > Static VLAN screen.
Change Pages
Click Previous or Next to show the previous/next screen if all status information cannot
be seen in one screen.
Chapter 7 VLAN
for more information on private VLANs.
XS3700 Series User's Guide
85
Section 33.1 on
Advertisement
Table of Contents
