Ipv6 Prefix Setup - ZyXEL Communications XS3700 Series User Manual

Table 26 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Router Discovery Setup (continued)
LABEL
Flags
Minimum Interval
Maximum Interval
Lifetime
Suppress

6.8.9 IPv6 Prefix Setup

Use this screen to configure the Switch's IPv6 prefix list for each interface. Click the link next to
IPv6 Prefix Setup in the IPv6 Configuration screen to display the screen as shown next.
Figure 40 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Prefix Setup
The following table describes the labels in this screen.
Table 27 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Prefix Setup
LABEL
Interface
Prefix
Prefix Length
Valid Lifetime
Chapter 6 Basic Setting
DESCRIPTION
This field displays whether IPv6 hosts use DHCPv6 to obtain IPv6 stateful addresses
(M) and/or additional configuration settings (O).
This field displays the minimum time interval at which the Switch sends router
advertisements for this interface.
This field displays the maximum time interval at which the Switch sends router
advertisements for this interface.
This field displays how long the router in router advertisements can be used as a
default router for this interface.
This field displays whether the Switch sends router advertisements and responses to
router solicitations on this interface (No) or not (Yes).
DESCRIPTION
Select the IPv6 interface you want to configure.
Set the IPv6 prefix that the Switch includes in router advertisements for this interface.
Set the prefix length that the Switch includes in router advertisements for this
interface.
Specify how long (from 0 to 4294967295 seconds) the prefix is valid for on-link
determination.
XS3700 Series User's Guide
76