ZyXEL Communications XS3700 Series User Manual page 302

Chapter 35 Link Layer Discovery Protocol (LLDP)
Figure 196 Advanced Application > LLDP > LLDP-MED Location
The following table describes the labels in this screen.
Table 162 Advanced Application > LLDP > LLDP-MED Location
LABEL DESCRIPTION
Port Enter the port number you want to set up the location within the LLDP-MED network.
Location The LLDP-MED uses geographical coordinates and Civic Address to set the location
Coordinates information of the remote device. Geographical based coordinates includes latitude,
longitude, altitude and datum. Civic Address includes Country, State, County, City, Street
and other related information.
Latitude Enter the latitude information. The value should be from 0º to 90º.
• north
• south
Longitude Enter the longitude information. The value should be from 0º to 180º.
• west
• east
XS3700 Series User's Guide
302