Table of Contents
Advertisement
Chapter 5 ZON Utility, ZON Neighbor Management and Port Status
Figure 20 Status: Port Details
The following table describes the labels in this screen.
Table 8 Status > Port Details
LABEL
DESCRIPTION
Port Info
Port NO.
This field displays the port number you are viewing.
Name
This field displays the name of the port.
Link
This field displays the speed (such as 100M for 100Mbps, 1000M for 1000 Mbps, or 10G
for 10 Gbps) and the duplex (F for full duplex).
State
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port (see
Section 11.1.3 on page 109
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it displays
STOP.
LACP
This field shows if LACP is enabled on this port or not.
TxPkts
This field shows the number of transmitted frames on this port
RxPkts
This field shows the number of received frames on this port
Errors
This field shows the number of received errors on this port.
Tx KBs/s
This field shows the transmission speed of data sent on this port in kilobytes per second.
Rx KBs/s
This field shows the transmission speed of data received on this port in kilobytes per
second.
for more information).
XS3700 Series User's Guide
49
Advertisement
Table of Contents
