Table of Contents
Advertisement
Figure 7 Transceiver Installation Example
Press the transceiver firmly until it clicks into place.
2
The Switch automatically detects the installed transceiver. Check the LEDs to verify that it is
3
functioning properly.
Figure 8 Installed Transceiver
3.1.2.2 Transceiver Removal
Use the following steps to remove a transceiver.
Open the transceiver's latch (latch styles vary).
1
Figure 9 Opening the Transceiver's Latch Example
Pull the transceiver out of the slot.
2
Figure 10 Transceiver Removal Example
Chapter 3 Hardware Overview
XS3700 Series User's Guide
30
Advertisement
Table of Contents
