ZyXEL Communications XS3700 Series User Manual page 32

Connecting the Power
Use the following procedures to connect the Switch to a power source after you have installed it in
a rack.
Note: Use the included power cord for the AC power connection.
Connect the female end of the power cord to the AC power socket.
1
Connect the other end of the cord to a power outlet.
2
Disconnecting the Power
The power input connectors can be disconnected from the power source individually.
Disconnect the power cord from the power outlet.
1
Disconnect the power cord from the AC power socket.
2
Chapter 3 Hardware Overview
XS3700 Series User's Guide
32