ZyXEL Communications XS3700 Series User Manual page 238

10 gbe l2+ switch
Hide thumbs Also See for XS3700 Series:
Table of Contents

Advertisement

Figure 150 IP Source Guard > ARP Inspection Log Status
The following table describes the labels in this screen.
Table 122 IP Source Guard > ARP Inspection Log Status
LABEL
Clearing log status table
Total number of logs
Index
Port
VID
Sender Mac
Sender IP
Num Pkts
Reason
Time
Chapter 25 IP Source Guard
DESCRIPTION
Click Apply to remove all the log messages that were generated by ARP packets
and that have not been sent to the syslog server yet.
This field displays the number of log messages that were generated by ARP packets
and that have not been sent to the syslog server yet. If one or more log messages
are dropped due to unavailable buffer, there is an entry called overflow with the
current number of dropped log messages.
This field displays a sequential number for each log message.
This field displays the source port of the ARP packet.
This field displays the source VLAN ID of the ARP packet.
This field displays the source MAC address of the ARP packet.
This field displays the source IP address of the ARP packet.
This field displays the number of ARP packets that were consolidated into this log
message. The Switch consolidates identical log messages generated by ARP
packets in the log consolidation interval into one log message. You can configure
this interval in the ARP Inspection Configure screen. See
239.
This field displays the reason the log message was generated.
dhcp deny: An ARP packet was discarded because it violated a dynamic binding
with the same MAC address and VLAN ID.
static deny: An ARP packet was discarded because it violated a static binding with
the same MAC address and VLAN ID.
deny: An ARP packet was discarded because there were no bindings with the same
MAC address and VLAN ID.
dhcp permit: An ARP packet was forwarded because it matched a dynamic
binding.
static permit: An ARP packet was forwarded because it matched a static binding.
In the ARP Inspection VLAN Configure screen, you can configure the Switch to
generate log messages when ARP packets are discarded or forwarded based on the
VLAN ID of the ARP packet. See
This field displays when the log message was generated.
XS3700 Series User's Guide
238
Section 25.7.2 on page
241.
Section 25.7 on page

Advertisement

Table of Contents
loading

Table of Contents