Table of Contents
Advertisement
Figure 142 IP Source Guard > Static Binding
The following table describes the labels in this screen.
Table 114 IP Source Guard > Static Binding
LABEL
ARP Freeze
Condition
Static Binding
MAC Address
IP Address
VLAN
Chapter 25 IP Source Guard
DESCRIPTION
ARP Freeze allows you to automatically create static bindings from the current ARP
entries (either dynamically learned or static ARP entries) until the Switch's binding
table is full.
Note: The ARP learning mode should be set to ARP-Request in the IP Application >
ARP Setup > ARP Learning screen before you use the ARP Freeze feature.
All - Select this and click ARP Freeze to have the Switch automatically add all the
current ARP entries to the static bindings table.
Port List - Select this and enter the number of the port(s) (separated by a comma).
ARP entries learned on the specified port(s) are added to the static bindings table
after you click ARP Freeze.
VLAN List - Select this and enter the ID number of the VLAN(s) (separated by a
comma). ARP entries for the specified VLAN(s) are added to the static bindings table
after you click ARP Freeze.
Enter the source MAC address in the binding.
Enter the IP address assigned to the MAC address in the binding.
Enter the source VLAN ID in the binding.
XS3700 Series User's Guide
226
Advertisement
Table of Contents
