Table of Contents
Advertisement
Figure 178 Advanced Application > MAC Pinning
The following table describes the labels in this screen.
Table 145 Advanced Application > MAC Pinning
LABEL
DESCRIPTION
Active
Select this option to turn on the MAC pinning function on the Switch.
Port
This field displays the port number.
*
Use this row to make the setting the same for all ports. Use this row first and then make
adjustments to each port if necessary.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active
Select this check box to enable MAC pinning on this port. The port then has priority over
other ports in MAC address learning.
Clear this check box to disable MAC pinning.
Apply
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Chapter 32 MAC Pinning
XS3700 Series User's Guide
272
Advertisement
Table of Contents
