Table of Contents
Advertisement
Table 166 IP Application > Policy Routing > Rule Configuration (continued)
LABEL
DESCRIPTION
Add
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these changes
if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to reset the fields to your previous configuration.
Clear
Click Clear to set the above fields back to the factory defaults.
Active
This field displays whether the policy route profile is enabled or not.
Profile Name
This field displays the name of the policy route profile with which the rule is associated.
Seq
This field displays the rule index number that you configure in the Sequence field. Click an
index number to change the rule's Statement.
State
This field displays permit when the rule action is activated and deny when is it
deactivated.
Classifier
This field displays the name of the classifier to which this policy applies.
Rule Delete
Select the policy routing rule(s) that you want to remove.
Delete
Click Delete to remove the selected entry(ies) from the summary table.
Cancel
Click Cancel to clear the Rule Delete check boxes.
Chapter 37 Policy Routing
XS3700 Series User's Guide
312
Advertisement
Table of Contents
