Table of Contents
Advertisement
Figure 86 Advanced Application > Mirroring > RMirror > Connected Port
The following table describes the labels in this screen.
Table 63 Advanced Application > Mirroring > RMirror > Connected Port
LABEL
DESCRIPTION
RMirror VLAN ID
Select the RMirror VLAN over which the mirrored traffic is forwarded.
Port
This field displays the port number.
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this
row first to set the common settings and then make adjustments on a port-by-port
basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Connected Port
When the Switch is a source device in remote port mirroring, select this option to have
the port help forward mirrored traffic to the connected port of the intermediate or
destination device in the same RMirror VLAN.
When the Switch is an intermediate device in remote port mirroring, select this option
to have the port receive mirrored traffic from the connected source or another
intermediate device or forward mirrored traffic to the connected destination or another
intermediate device in the same RMirror VLAN.
When the Switch is a destination device in remote port mirroring, select this option to
have the port receive mirrored traffic from the connected source or intermediate
device in the same RMirror VLAN.
Apply
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the nonvolatile memory when you are done
configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Chapter 14 Mirroring
XS3700 Series User's Guide
138
Advertisement
Table of Contents
