ZyXEL Communications XS3700 Series User Manual page 427

10 gbe l2+ switch
Hide thumbs Also See for XS3700 Series:
Table of Contents

Advertisement

List of National Codes
COUNTRY
Austria
Belgium
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Luxembourg
Notices
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASS 1
PRODUCT COMPLIES WITH 21 CFR 1040.10 AND 1040.11.
PRODUIT CONFORME SELON 21 CFR 1040.10 ET 1040.11.
Safety Warnings
Do NOT use this product near water, for example, in a wet basement or near a swimming pool.
Do NOT expose your device to dampness, dust or corrosive liquids.
Do NOT store things on the device.
Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning.
Do not obstruct the device ventillation slots as insufficient airflow may harm your device.
Connect ONLY suitable accessories to the device.
Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY
qualified service personnel should service or disassemble this device. Please contact your vendor for further information.
Make sure to connect the cables to the correct ports.
Place connecting cables carefully so that no one will step on them or stumble over them.
Always disconnect all cables from this device before servicing or disassembling.
Use ONLY an appropriate power adaptor or cord for your device. Connect it to the right supply voltage (for example, 110V AC in North
America or 230V AC in Europe).
Use ONLY power wires of the appropriate wire gauge for your device. Connect it to a power supply of the correct voltage.
Do NOT allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power
adaptor or cord.
Do NOT use the device if the power adaptor or cord is damaged as it might cause electrocution.
If the power adaptor or cord is damaged, remove it from the device and the power source.
Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a new one.
Fuse Warning! Replace a fuse only with a fuse of the same type and rating.
The POE (Power over Ethernet) devices that supply or receive power and their connected Ethernet cables must all be completely
indoors.
Environment Statment
WEEE Directive
Appendix D Legal Information
ISO 3166 2 LETTER CODE
COUNTRY
AT
Malta
BE
Netherlands
CY
Poland
CR
Portugal
DK
Slovakia
EE
Slovenia
FI
Spain
FR
Sweden
DE
United Kingdom
GR
Iceland
HU
Liechtenstein
IE
Norway
IT
Switzerland
LV
Bulgaria
LT
Romania
LU
Turkey
XS3700 Series User's Guide
427
ISO 3166 2 LETTER CODE
MT
NL
PL
PT
SK
SI
ES
SE
GB
IS
LI
NO
CH
BG
RO
TR

Advertisement

Table of Contents
loading

Table of Contents