Table of Contents
Advertisement
Figure 28 Basic Setting > IP Configuration
The following table describes the labels in this screen.
Table 15 Basic Setting > IP Configuration
LABEL
DESCRIPTION
Default Gateway
Enter the IP address of the default outgoing gateway in dotted decimal notation.
Domain Name
DNS (Domain Name System) is for mapping a domain name to its corresponding IP
Server
address and vice versa. Enter a domain name server IP address in order to be able to
use a domain name instead of an IP address.
Default
Specify which traffic flow (In-Band or Out-of-band) the Switch is to send packets
Management
originating from itself (such as SNMP traps) or packets with unknown source.
Select Out-of-band to have the Switch send the packets to the management port
labelled MGMT. This means that device(s) connected to the other port(s) do not
receive these packets.
Select In-Band to have the Switch send the packets to all ports except the
management port (labelled MGMT) to which connected device(s) do not receive these
packets.
Apply
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Chapter 6 Basic Setting
XS3700 Series User's Guide
61
Advertisement
Table of Contents
