Table of Contents
Advertisement
Item
Default
Backup
Click it to save the system configuration to your computer. (export.cfg)
Remote TFTP Server IP
Empty
Address
File Name
Empty
Restore
Click it to restore your system configuration.
Local PC File Path
Empty
Remote TFTP Server IP
Empty
Address
File Name
Empty
Reset the system back
Erase all setting and back to factory setting.
to factory defaults
Keep subscriber profile Disable
3.4.2 Firmware Upgrade
The Firmware Upgrade menu loads updated firmware to be permanent in flash ROM. The download file should be a binary file from
factory; otherwise the agent will not accept it. After downloading the new firmware, the agent will automatically restart it.
Manual Firmware Upgrade
114
Figure 3-172 Configuration Setting Screen
Description
Enter the IP address of TFTP Server.
Enter the file name in the File Name field.
Enter the file pathname of the system configuration file in the
Local PC File Path field.
Enter the IP address of TFTP Server.
Enter the file name in the File Name field.
Click the keep subscriber profile to change all the parameters
into factory setting but still reserve the subscriber profiles.
WSG-403 User Guide
Advertisement
Table of Contents
