Planet Networking & Communication Hot Spot WSG-403 User Manual page 99

Server IP Address Empty
Server MAC Address Empty
Item Default
Syslog on WAN
Server 1 IP Address Empty
Server 2 IP Address Empty
Send to Email Disable
E-mail Server
IP Address or Domain Empty
Name
SMTP Port 25
E-mail (SMTP) Server Disable
needs to check my
account
Username Empty
Password Empty
Email From
Name Empty
Email Address Empty
Email To
Email Address 1 Empty
Email Address 2 Empty
Click Apply button to save the new settings.
Click Apply button, the success dialog box appears. Click on Back to return to Syslog setting screen.
Log Categories
Wireless Subscriber Gateway
Enter syslog server's IP address. The WSG-403 will send all of its
logs to the specified syslog server.
Enter the syslog server's MAC address. The WSG-403 will send
all of its logs to the specified syslog server.
Description
Enter IP address of first syslog server.
Enter IP address of second syslog server.
Enables or disables the send to e-mail function.
Enter the SMTP server IP address or domain name. The
maximum allowed characters length is 50.
The SMTP port allowed range is 25 or 2500 to 2599.
If your SMTP server requires authentication before accepting
e-mail, click on check box. These values (username and
password) are supplied by your network administrator, SMTP
server provider or ISP.
Enter the username for the SMTP server. The maximum allowed
characters length is 64.
Enter the password for the SMTP server
Enter the name you would like to appear in the "message from"
field of your outgoing message. The maximum allowed
characters length is 20.
Enter your e-mail address. This is the address others will use to
send email to Email Address 1/Email Address 2.
Enter your first e-mail address to receive the logs.
Enter your second e-mail address to receive the logs.
Figure 3-148 Success Dialog Box
97