Planet Networking & Communication Hot Spot WSG-403 User Manual page 20

Item
IP Address
Subnet Mask
Gateway IP
Address
Primary DNS
Server
Secondary
DNS Server
PPPoE (Point-to-Point Protocol over Ethernet)
If "PPPoE" is selected, then this screen will appear. Enter the username, password and other major fields.
18
Figure 3-7 Internet Connection Setting Screen—Static IP Setting
Default
0.0.0.0 Enter the IP address provided by your ISP.
0.0.0.0 Enter the subnet mask for the IP address.
0.0.0.0 Enter the Gateway IP Address provided by your ISP.
Empty Enter the primary DNS server IP address for the xDSL/Cable
connection (provided by your ISP).
Empty Enter the secondary DNS server IP address for the xDSL/Cable
connection (provided by your ISP). If the primary DNS Server IP were
not available, meanwhile, Secondary DNS Server IP would start in the
same time.
Figure 3-8 Internet Connection Setting Screen—PPPoE Setting
Description
WSG-403 User Guide