Planet Networking & Communication Hot Spot WSG-403 User Manual page 19

Click on reset button to clear the username and password data.
Note:
This Web agent is best viewed with IE 5.0 or Netscape 6.0 and above browsers.
If you would like to change the password please see Step 10.
Username and Password can consist of up to 20 alphanumeric characters and are case sensitive.
If for some reason your password is lost or you cannot gain access to the WSG-403 Configuration Program, please press the reset
button to load the device to manufacturer defaults.
If the WSG-403 doesn't send packet in 5 minutes (default), the WSG-403 wills logout automatically.
Proxy needs to set disable first when administrator accesses admin UI.
Step 3: Internet Connection Setting
Select the appropriate Internet connection type to connect to your ISP. There are options for DHCP client, Static IP address, PPPoE and
PPTP. Please consult your ISP for the collection connection type.
DHCP Client
The device can work as a DHCP client. This allows the device to obtain the IP address and other TCP/IP settings from your ISP. If your
Static IP Setting
If Static IP Setting is selected, then this screen will appear. Enter the IP address information provided by your ISP.
Wireless Subscriber Gateway
Figure 3-5 Internet Connection Setting Screen
xDSL/Cable comes with this feature, please enable Use DHCP Client.
Figure 3-6 Internet Connection Setting Screen—DHCP Client Setting
17