Planet Networking & Communication Hot Spot WSG-403 User Manual page 21

Item
Username
Password
PPP MTU Setting 1492
TCP MSS Setting 1452
Service Name
Item
Connect on Demand and Max Idle Time
Connect on
Demand
Max Idle Time
Keep alive and Redial Period
Keep alive
Redial Period
PPTP Client (Point-to-Point Tunneling Protocol)
If "PPTP" is selected, then this screen will appear. Fill out all the information provided by your ISP.
Wireless Subscriber Gateway
Default
Enter the user name provided by your ISP. The user name can consist
Empty
of up to 80 alphanumeric characters and is case sensitive.
Enter the user password provided by your ISP. The password can
Empty
consist of up to 80 alphanumeric characters and is case sensitive.
MTU (Maximum Transfer Unit) specifies maximum transmission unit
size.
MSS (Maximum Segment Size) specifies maximum segment size.
Enter the service name provided by your ISP. The service name can
Empty
consist of up to 64 alphanumeric characters and is case sensitive.
Default
You can configure your WSG-403 to cut your connection with your ISP
Enable
after a specified period of time (Max Idle Time). If you have been
disconnected due to inactivity, Connect on Demand enables your
WSG-403 to automatically re-establish your connection as soon as you
attempt to access the Internet again. If you wish to activate Connect on
10
Minutes Demand, click the radio button. If you want your Internet connection to
remain, click the radio button of keep alive. The Max Idle Time
maximum value is 65535 minutes.
Disable This option keeps your PPPoE enabled Internet access connected
indefinitely, even when it sits idle. The Redial Period maximum value is
30
65535 seconds.
Seconds
Description
Description
19