Planet Networking & Communication WPG-130N Quick Installation Manual

Quick Installation Guide
WPG-130N
802.11n Pocket Presentation Gateway

1. Package Contents

Thank you for choosing PLANET WPG-130N. Before
installing the device, please verify the contents inside the
package box.
WPG-130N Quick Guide
World-Wide Adapter Set
Power Adapter
(US/EU/UK)
If there is any item missed or damaged, please
contact the seller immediately.
Note

3. Hardware Installation

Step 1: Please turn on your projector first, and connect
the WPG-130N to the projector via VGA port.
Now you can power on WPG-130N.
Step 2: When the projector shows the default screen as
below, it indicates WPG-130N is ready now.
SSID: WPG-130N
Channel: 6
Security: OFF
Server IP: 192.168.1.1
Resolution: 1024 x 768
Version: 1.0.0.0
CD-ROM
VGA Adapter
– 1 –
Power
Power
Adapter
– 3 –

2. Physical Installation

Front Panel Description
Power Connector
(5V DC Input)
Rear Panel Description
VGA Connector
4. Software Installation – Windows
Default SSID: WPG-130N
Default IP Address: 192.168.1.1
Default Username: admin
Default Password: admin
Step 1: Site survey the wireless signal of WPG-130N,
and connect your PC with it wirelessly.
* The connection information can be found from the
projector screen.
Reset Button
Power LED
– 2 –
– 4 –