Table of Contents
Advertisement
2. Installation
The followings are instructions for setting up the WSG-403. Refer to the illustration and follow the simple steps below to quickly install
your WSG-403.
2.1 Wall-Mounting
The WSG-403 can be wall-mounted on a wall by applying the two mounting brackets on screws.
Figure 2-1 Wall-Mounting Bracket - Bottom of WSG-403
Please refer to the following instructions for mounting a WSG-403 on a wall or other surface.
1.
Install two screws on a wall according to the relative positions shown below.
Figure 2-2
2. Hang WSG-403 on the wall by sliding the two screws in the mounting brackets.
Note: If the screws are not properly anchored, the strain of the cables connected to the WSG-403 rear panel connectors could pull out the
WSG-403 from the wall.
2.2 Connecting the Antennas
The WSG-403 provides two antenna connectors on the rear of the unit.
WSG-403 User Guide
12
Advertisement
Table of Contents
