Planet Networking & Communication Hot Spot WSG-403 User Manual page 23

Item
Connection ID/Name
Connect on Demand and Max Idle Time
Connect on Demand
Max Idle Time
Keep alive and Redial Period
Keep alive
Redial Period
Step 4: Wireless Setting
This page allows you to define ESSID, Channel ID for wireless connection.
Item
ESSID
Channel
Step 5: E-mail Server Setting
WSG-403 allows an extra Email server parameter to forward the subscriber's E-mail.
Wireless Subscriber Gateway
Default
Enter the connection ID or connection name. The connection
Empty ID/Name can consist of up to 81 alphanumeric characters
and is case sensitive.
Enable You can configure your WSG-403 to cut your connection with
your ISP after a specified period of time (Max Idle Time). If
you have been disconnected due to inactivity, Connect on
Demand enables your WSG-403 to automatically re-establish
your connection as soon as you attempt to access the
10 Minutes
Internet again. If you wish to activate Connect on Demand,
click the radio button. If you want your Internet connection to
remain, click the radio button of keep alive. The Max Idle
Time maximum value is 65535 minutes.
This option keeps your PPTP enabled Internet access
Disable
connected indefinitely, even when it sits idle. The Redial
30 Seconds
Period maximum value is 65535 seconds.
Figure 3-10 Wireless Setting Screen
Default
Wireless The ESSID is the unique name that is shared among all points in a
wireless network. It is case sensitive and must not exceed 32
characters.
6 Enter the channel ID for wireless connection.
Description
Description
21