Planet Networking & Communication Hot Spot WSG-403 User Manual page 107

Item
General Settings
ESSID
Channel
Security
WPA Encryption
Pre-shared Key
Group Key
Re-Keying
Use WPA with
Pre-shared Key
Pre-Shared Key
Use WPA with
RADIUS
Server IP
Authentication Port 1812
Share Secret Key
WEP Encryption
Encryption
Mode
WEP Key
Wireless Subscriber Gateway
Default
The ESSID is the unique name that is shared among all
Wireless points in a wireless network. It is case sensitive and must not
exceed 32 characters.
6 Select the channel ID for wireless connection.
Select disable to allow wireless station to communicate with
Disable the device without any data encryption. Select enable to
enable WPA or WEP data encryption.
Wi-Fi Protected Access Encryption
Enter a pre-shared key from 8 to 63 case sensitive ASCII
Empty
characters.
86400 Seconds Enter a number in the field to set the force re-keying interval.
Enable
Enter a pre-shared key from 8 to 63 case sensitive ASCII
Empty
characters.
Disable
Enter the RADIUS server IP address or domain name. The
Empty
maximum allowed characters length is 15.
Enter the authentication port number. The allowed numbers
are from 0 to 65535.
Empty Enter the RADIUS secret key
Wired Equivalent Privacy Encryption
64 bit The WSG-403 supports 64-bit or 128 bit WEP encryption.
Options: HEX (Hexadecimal) and ASCII (American Standard
HEX
Code for Information Interchange).
This selects which of the Keys the WSG-403 uses when it
transmits. You can change the selected encryption key every
now and then to increase the security of your network.
Note: You have to configure all WEP keys (1~4), and select
one of the four WEP key.
Enter 5 characters (case sensitive) for ASCII 64-bit WEP
1
Key.
Enter 10 characters (case sensitive) for Hex 64-bit WEP Key.
Enter 13 characters (case sensitive) for ASCII 128-bit WEP
Key.
Enter 26 characters (case sensitive) for Hex 128-bit WEP
Key.
Description
105