Planet Networking & Communication Hot Spot WSG-403 User Manual page 9

LEDs Indication
LED State Description
PWR
Off The WSG-403 is not receiving electrical power.
Green* The WSG-403 is receiving electrical power.
SYS
Off The WSG-403 status is defective while PWR LED steady ON.
Green The WSG-403 status is complete.
Green ( Blinking)* During firmware upgrades, this sys
WAN
Off WAN Port has not established any physical network connection.
Green The port has established a valid 10/100Mbps network connection
Green ( Blinking) 10/100Mbps traffic is traversing WAN port.
LAN-1~
Off The Port has not established any physical network connection.
LAN-4
Green The port has established a valid 10/100Mbps network connectio
Green ( Blinking) 10/100Mbps traffic is traversing the port.
WLAN
Off The Wireless is not ready.
Green The WSG-403 has establish
Green ( Blinking) The Wireless connection is active.
Wireless Subscriber Gateway
Figure 1-2 WSG-403 Top Panel
Figure 1-3 LEDs
tem LED will blink.
ed a valid wireless connection.
.
n.
7