Toshiba RAS-M10PKVP-E Service Manual page 136

No. Part name
4 Inverter 8) Remove the soundproof plate (upper).
assembly 9) Remove the terminal cover of the compressor and then
(Continued) remove the compressor lead of the compressor.
10) Pull up the inverter assembly and then remove it.
∗ Hold up both the reactor cover side and the inverter box
side and then remove the inverter assembly upward.
∗ Caution to mount the inverter assembly When mounting
the inverter assembly to the partition plate, be sure to do
hooking.
NOTE
Using the bundling band on the market, be sure to bind the
portions which were bound before.
Procedure
Reactor cover side
Inverter box side Inverter box side Inverter box side
Hook
Partition cover
– 136 –
Remarks
Soundproof plate (upper)
Compressor lead Case thermo
Black Black Black
White Red