Messages And Conditions; Messages On The Printer Lcd - DataCard SD160 User Manual

Messages and Conditions

When the printer cannot process the card sent, it issues a condition. The LCD panel on the front
panel shows these conditions. The XPS Card Printer Driver also displays the condition as a
message on the PC.
In a shared printer environment, messages can differ slightly from the messages and conditions
described in this section.

Messages on the Printer LCD

Messages from the XPS Card Printer Driver on the PC
Messages from Printer Manager
Other Messages
Messages on the Printer LCD
All messages are associated with a print job. The printer issues messages that focus on recovering
from problems.
The printer displays a message number and a short description for each message.
If more than one message was issued, the next message displays after you correct the
problem and press the U
The lights on the front panel flash while messages display on the LCD panel.
No. LCD Message
100 Request not supported
101 Job could not complete
102 Card not in position
103 Printer problem
104 Critical problem
105 Magstripe data error
106 Magstripe data not found
107 Magstripe read data error
108 Magstripe read no data
50
on page 52
on page 52
button.
SER
User Light
Amber Flash
Amber Flash
Amber Flash
Amber Flash
Amber Flash
Amber Flash
Amber Flash
Amber Flash
Amber Flash
on page 52
Supply Light Card Light
Off Off
Off Off
Off Amber Flash
Off Off
Amber Flash Amber Flash
Off Off
Off Amber Flash
Off Off
Off Amber Flash
Sound
Error
Error
Error
Error
Error
Error
Error
Error
Error
Troubleshooting