113: Close cover to continue
The cover is open or the print ribbon cartridge is missing.
Confirm that the print ribbon cartridge is installed and then close the cover.
Press the U
SER
cancel the card.
H
& T
INTS
IPS
Make sure that the ribbon cartridge is installed properly with the cartridge handle even with
the edges of the printer.
Press down on the cover ridges to make sure that the cover latches properly on both sides.
114: Cover opened during job
The printer cover was opened while printing.
Push down on the cover to latch it.
Press the U
button on the printer to clear the message. On the PC, click Retry, or click Cancel to
SER
cancel the card.
H
& T
INTS
IPS
Make sure that the ribbon cartridge is installed properly with the handle even with the edges
of the printer.
Press down on the cover ridges to make sure that the cover latches properly on both sides.
116: Magstripe not available
The printer does not have a magnetic stripe option. The card will be canceled.
Remove magnetic stripe data from the card or use a printer that has a magnetic stripe option
installed.
Press the U
SER
H
& T
INTS
IPS
To remove magnetic stripe data, you or your system administrator may need to:
Clear a check box in the card production application.
Change the font from Mag Trackx XPS Card Printer to a printable font such as Arial, Verdana,
or Calibri. Refer to "Magnetic Stripe Fonts" in your printer's Driver Guide.
SD160/SD260 Card Printers User's Guide
button on the printer to clear the message. On the PC, click OK, or click Cancel to
button on the printer, or click OK on the PC to clear the message.
57