Table of Contents
Advertisement
8. Remove the stop ring and bush from the
original feed pulley unit and pull out the for-
warding pulley shaft.
9. Remove the DP forwarding pulley from the
original feed pulley unit.
10. Clean or replace the DP original feed belt
and DP forwarding pulley, and attach the
belt and pulley to the original feed pulley
unit.
* When replacing the DP original feed pulley,
make sure that the one-way clutch of the
pulley is placed toward the rear side of the
machine.
11. Insert the original feed belt unit to the origi-
nal feed pulley unit.
Detaching the DP separation roller
12. Insert the flat-blade screwdriver to the
inserted part of the separation guide and
remove the separation guide from the DP.
Y104350-7
Forwarding
pulley shaft
Bush
DP forwarding pulley
Sevice Manual
Original feed
pulley unit
Stop ring
Bush
Figure 1-6-167
Original feed belt unit
One-way clutch
Figure 1-6-168
Separation guide
Figure 1-6-169
1-6-85
Advertisement
Table of Contents
