Olivetti d-Copia 600 Service Manual page 240

(2) Detaching and refitting the paper feed pulley, forwarding pulley and separation pulley of cassette 3 and 4
Follow the procedure below to clean or replace the paper feed pulley, forwarding pulley or separation pulley of cassette 3
and 4.
Explanation of an detaching and refitting procedure is given only a cassette 3 since cassettes 3 and 4 are the same feed
units.
Procedure
1. Pull out cassette 1, 3 and 4.
2. Remove the screw and then remove the
front lower right cover.
3. While pushing the hook of primary paper
feed unit, pull out the unit forward.
4. Remove the primary paper feed unit from
the machine.
1-6-10
Hook
Service Manual
Figure 1-6-18
Primary paper feed unit
Figure 1-6-19
Front lower
right cover
Y104350-7