Table of Contents
Advertisement
Maintenance
item No.
Setting the number of days after which to automatically delete documents
U266
Description
Sets the number of days to save documents on the HDD before automatically deleting.
Purpose
To change the number of days to retain data that is saved within the auto-delete area of the HDD before auto-
matically deleting.
Method
Press the start key. The current setting is displayed.
Setting
1. Change the setting using the cursor up/down keys.
Description
Number of days after which to automatically delete documents
2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
Setting auto application change time
U277
Description
Sets the time that passes until the machine starts automatically printing after completing copying or operation
when the machine is used as a printer (only if the printer kit is installed).
Purpose
According to user request, changes the setting.
Method
Press the start key. The current setting is displayed.
Setting
1. Change the setting using the cursor up/down keys.
Description
Switching time
The setting can be changed by 30 s per step.
2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
Setting stamp mode ON/OFF
U281
Description
Sets ON/OFF of the stamp mode.
Purpose
To turn the setting on, in order to manage, by which machine it was printed.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Display
ON
OFF
Initial setting: OFF
When setting turns to ON, set a stamp number using the numeric keys.
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
1-4-58
Description
Setting range
30 to 270 (s)
Description
A stamp function is used.
A stamp function is not used.
Service Manual
Setting range Default setting
0 to 7
0
Default setting
30 (s)
Y104350-7
Advertisement
Table of Contents
