Olivetti d-Copia 600 Service Manual page 306

(7) Detaching and refitting the fuser heater M, S and L
Follow the procedure below to check or replace the fuser heater M, S and L.
Procedure
1. Remove the fuser unit (see page 1-6-70).
2. Remove the upper fuser cover and upper
fuser frame (see page 1-6-72).
3. Remove the screw and then remove the
front fuser cover.
4. Remove the screw of the fuser thermostat
left, and then remove the terminals of the
fuser heater M, S and L.
5. Remove the screw and then remove the
front fuser holder.
1-6-76
Terminal of the fuser
heater S
Service Manual
Fuser unit
Front fuser cover
Figure 1-6-146
Terminal of
the fuser heater M
Terminal of
the fuser heater L
Figure 1-6-147
Front fuser holder
Figure 1-6-148
Y104350-7