Table of Contents
Advertisement
Maintenance
item No.
Setting punch destination
U234
Description
Sets the destination of optional punch unit of document finisher.
Purpose
To be set when installing the optional punch unit.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the destination.
Display
NOTHING
JAPAN METRIC
INCH
EUROPE METRIC
SWEDEN METRIC Metric (North Europe) specifications
Initial setting: NOTHING
2. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Setting output tray initialize mode
U235
Description
Sets whether or not initialization (shift of eject position to main tray) is performed when auto clear is triggered
if a multi-job tray is installed to an optional document finisher.
Purpose
To be set as required according to the user.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the item to be set. The selected item is displayed in reverse.
Display
HP ON
HP OFF
Initial setting: HP ON
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
Press the stop/clear key at the screen for selecting an item.
The screen for selecting a maintenance item No. is displayed.
Y104350-7
Description
Description
Automatic recognization
Metric (Japan) specifications
Inch (North America) specifications
Metric (Europe) specifications
Description
Job tray initialization is performed.
Job tray initialization is not performed.
Sevice Manual
1-4-43
Advertisement
Table of Contents
