Olivetti d-Copia 600 Service Manual page 123

Maintenance
item No.
Setting the paper stop timing
U248
1. Select PUNCH POSITION ADJUST at the screen for selecting an item.
2. Change the value using the cursor up/down keys.
Description
Adjustment of the paper stop timing in punch mode
If the distance of the position of a punch hole is smaller than the specified value A, increase the preset
value. If the distance is larger than the value A, decrease the preset value.
Changing the value by 1 changes by 1.0 mm.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Displaying the punch-hole scrap count
1. Select PUNCH COUNT at the screen for selecting an item.
2. Change the value using the cursor up/down keys.
Press the reset key to clear the count.
Description
Punch-hole scrap count
(current number of punching times)
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Setting the booklet stapling position
1. Select SADDLE STAPLE ADJUST at the screen for selecting an item.
2. Select the size to be set.
3. Change the setting using the cursor up/down keys.
Display
A4R/8.5 x 11 Adjustment of booklet stapling position for
B4R/8.5 x
14
A3R/11 x 17
If the staple position is displaced toward the ejection side (copy sample 1), decrease the preset value. If
the staple position is displaced toward the feeding side (copy sample 2), increase the preset value.
Y104350-7
A
Description
A4R/8.5 x 11 size
Adjustment of booklet stapling position for
B4R/8.5 x 14 size
Adjustment of booklet stapling position for
A3R/11 x 17 size
Sevice Manual
Description
Setting
range
-10 to 10
Preset value A: 5.5 2mm (inch)
+ -
9.5 2mm (metric)
Setting range
0 to 9999999
Setting
range
-10 to 10 0
-10 to 10 0
-10 to 10 0
Default Change in value
setting per step
0 0.24 mm
+ -
Default setting
-
Default Change in value
setting per step
0.55 mm
0.55 mm
0.55 mm
1-4-51