Table of Contents
Advertisement
Maintenance
item No.
Adjusting finisher stack quantity
U237
Description
Sets the number of sheets of stack on the main tray in the optional document finisher.
Purpose
To change the setting when a stack malfunction has occurred.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Change the setting using the cursor up/down keys.
Setting
0
1
Initial setting: 0
If the preset value is changed to 1, the number of sheets of a stack is limited to 1,500 in modes other
than the staple mode.
2. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-4-44
Description
Description
Stack quantity: 3000 sheets
Stack quantity: 1500 sheets
Service Manual
Y104350-7
Advertisement
Table of Contents
