Final Reduction Disassembly; Final Reduction Inspection; Final Reduction Assembly - KYMCO ZX/SCOUT 50 Service Manual

9
. FINAL REDUCTION
FINAL REDUCTION
DISAS-SEMBLY
Remove the rear wheel. ( 14-3)
Remove the left crankcase cover. ( 8-3)
Remove the clutch/driven pulley. ( 8-7)
Drain the transmission gear oil into a clean
container.
Remove the transmission case cover
attaching bolts.
Remove the transmission case cover.
Remove the gasket and dowel pins.
Remove the final gear and countershaft.

FINAL REDUCTION INSPECTION

Inspect the countershaft and gear for wear
or damage.
9-3
Driver shift
Countershaft
Countershaft
ZX / SCOUT
Bolts
Driver
Final Gear
Dowel Pin