Final Reduction Disassembly; Final Reduction Inspection - KYMCO People GT 300i Service Manual

9. FINAL REDUCTION

FINAL REDUCTION DISASSEMBLY

Remove the exhaust muffler.
Remove the rear brake caliper.
Remove the right rear shock absorber.
Remove the rear fork.
Remove the rear wheel.
Remove the left crankcase cover.
Remove the clutch outer/driven pulleys.
Drain the transmission gear oil into a clean
container.
Remove the transmission case cover
attaching bolts.
Remove the transmission case cover.
Remove the gasket and dowel pins.
Remove the final shaft.
Remove the final gear and countershaft.

FINAL REDUCTION INSPECTION

Inspect the countershaft and gear for wear
or damage.
9-3
Transmission Case Cover
Dowel Pin
Final Shaft
People GT 300i
Final Gear
Countershaft