Final Reduction Disassembly; Final Reduction Inspection - KYMCO SUPER8 50 2T Service Manual

9
. FINAL REDUCTION
FINAL REDUCTION DISAS-SEMBLY
Remove the rear wheel. ( 14-3)
Remove the left crankcase cover. ( 8-4)
Remove the clutch/driven pulley. ( 8-15)
Drain the transmission gear oil into a clean
container.
Remove the transmission case cover
attaching bolts.
Remove the transmission case cover.
Remove the gasket and dowel pins.
Remove the final gear and countershaft.

FINAL REDUCTION INSPECTION

Inspect the countershaft and gear for wear
or damage.
9-3
Bolts
Driver shift
Final Shaft
Final Gear
Countershaft
Countershaft
Resin Washer
SUPER8 50 2T
Driver shift