KYMCO ZX/SCOUT 50 Service Manual page 127

12
. FRAME COVERS
FRAME COVERS REMOVAL
FRONT COVER REMOVAL
Remove the bolt attaching the front cover.
Remove the two screws on the back of the
front cover.
Remove the front cover downward.
Disconnect the headlight wire connector.
The installation sequence is the reverse of
removal.
During removal, be careful not to pull
the joint claws forcibly and remove the
front cover downward.
HANDLEBAR FRONT/REAR COVER
REMOVAL
First remove the handlebar rear cover:
Remove the four screws attaching the
handlebar rear cover.
Disconnect the wire connectors.
Remove the handlebar rear cover.
Remove the two screws attaching the handlebar
front cover.
Remove the handlebar front cover.
The installation sequence is the reverse of
removal.
FRONT RIGHT & LEFT LOWER
COVERS REMOVAL
First remove the front cover.
Remove the right and left side rails by
removing the two screws for each rail.
Remove the two bolts and three screws
attaching each of the front right and left lower
covers.
Remove the front right and left lower covers.
The installation sequence is the reverse of
removal.
When removing the right and left side
rails, pull them backward not to damage
the joint claws.
12-3
Front Cover
Bolt
Screw
Handlebar Rear Cover
Bolts
Bolt