KYMCO ZX/SCOUT 50 Service Manual page 53

5
. ENGINE REMOVAL/INSTALLATION
ENGINE REMOVAL
Remove the frame body cover. ( 12-5)
Remove the two bolts attaching the air
cleaner case.
Loosen the band between the air cleaner
and carburetor to remove the air cleaner
case.
Remove the carburetor cap.
Disconnect the oil pump control cable from
the pump body.
Disconnect the oil inlet line from the oil
pump.
After the oil inlet line is disconnected,
plug the oil line opening to prevent oil
from flowing out.
Disconnect the auto bystarter, A.C.
generator and starter motor wire
connectors.
Remove the spark plug cap.
Band
Carburetor Cap
Oil Inlet Line
Spark Plug Cap
ZX / SCOUT
Air Cleaner Case
Bolt
AC Generator Wire
Connector
Oil Pump Control Cable
5-2