KYMCO ZX/SCOUT 50 Service Manual page 35

3
. INSPECTION/ADJUSTMENT
Lubrication points
Remove carbon deposits on
Others
combustion chamber,
breather hole and exhaust
muffler
BRAKE DRUM/SHOE
Brake Shoe Wear
Replace the brake shoes if the arrow on the
brake arm aligns with reference mark" " on
the brake panel when the brake is fully
applied.
Brake Drum Wear/Damage
Check the brake drum appearance for
damage. Check if the brake lining wear is
within the specified service limit.
the brake operation for abnormal noise and
brake drum inside for wear or damage.
BRAKE DISK/LINING
Brake Disk Surface and Brake Pad
Wear
Check the brake disk surface for scratch.
Check if the brake pad wear is within the
specified service limit.
Brake Disk Runout Inspection
Jack the motorcycle wheels off the ground
and check if the brake disk runout is within
the specified service limit.
BRAKE FLUID LEVEL INSPECTION
Brake Master Cylinder Fluid Level
Inspection
Turn the steering handlebar upright and
check if the front brake fluid level is within
the specified limits through the front brake
master cylinder check hole.
○
Check
Brake Lining Service
Limit Mark
ZX /SCOUT 50
○
○
" " Marks
Adjusting Nuts
Brake Disk
<Front>
3-4