KYMCO ZX/SCOUT 50 Service Manual page 90

8
. KICK STARTER/DRIVE PULLEY/
ZX / SCOUT
CLUTCH/DRIVEN PULLEY
Drive in a new needle bearing into the
Bearing Driver Pilot
driven face with the mark facing up.
Outer Driver, 24x26mm
Driven Pulley Oil Seal
CLUTCH/DRIVEN PULLEY ASSEMBLY
First install the movable driven face onto
the driven face. Then, install the guide
roller pins, O-rings and a new oil seal.
O-rings
Guide Roller Pin
Install the seal collar.
8-16