KYMCO ZX/SCOUT 50 Service Manual page 119

11
. CARBURETOR
FLOAT/FLOAT VALVE INSPECTION
Inspect the float for damage or fuel inside
the float.
Check the float valve seat for wear or
damage.
JETS/SCREWS REMOVAL
Before removing the throttle stop screw or
air screw, record the number of rotations
until it seats lightly.
Remove the main jet and needle jet holder.
CARBURETOR PASSAGES CLEANING
Blow compressed air through all passages
of the carburetor body with an air gun.
11-9
Then, remove them.
ZX / SCOUT
Float Valve
Float Seat
Main Jet
Throttle Stop Screw
Air Screw