KYMCO ZX/SCOUT 50 Service Manual page 80

8
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
First install the washer and then the circlip
onto the kick starter spindle.
Install the kick lever.
LEFT CRANKCASE COVER
INSTALLATION
First install the dowel pins and then the seal
rubber.
Install the left crankcase cover and tighten
the nine bolts diagonally.
Connect the drive belt cooling air tube and
install the circlip.
For drum brake, note the location of the
brake cable clamp and install the rear
brake cable in place with the clamp.
ZX / SCOUT
Washer
Circlip
Dowel Pins
Left Crankcase Cover
8-6