KYMCO ZX/SCOUT 50 Service Manual page 137

13. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
ASSEMBLY
Pack all bearing cavities with grease.
Drive in the left bearing .
Install the distance collar.
Drive in the right bearing.
Drive the bearing squarely with the
sealed end facing out.
13-7
Bearing Puller
Pilot, 10mm
Pilot, 10mm
Outer Driver, 28x30mm
Apply grease to the dust seal lip and install the
dust seal.
Install the side collar.
ZX / SCOUT
Grease