KYMCO ZX/SCOUT 50 Service Manual page 158

14
. REAR WHEEL/REAR BRAKE/REAR
SHOCK ABSORBER
Remove the brake arm bolt to remove the
brake arm, wear indicator plate and felt
seal.
Remove the brake cam.
REAR BRAKE ASSEMBLY
Apply grease to the anchor pin and brake
shoe moving parts.
Apply grease to the brake cam and install it.
Apply engine oil to the felt seal and install
it to the brake cam.
Install the wear indicator plate.
Align the wide tooth of the wear
indicator plate with the wide groove on
the brake cam.
Install the brake arm onto the brake cam.
Align the punch mark on the brake arm
with the scribed line on the brake cam.
Install and tighten the brake arm bolt.
Install the brake arm return spring.
Install the brake shoes.
14-5
Wear Indicator Plate
Brake Arm Bolt
Brake Arm
Grease
Wear Indicator Plate
ZX / SCOUT
Brake Cam
Punch Mark
Brake Arm