KYMCO ZX/SCOUT 50 Service Manual page 185

16
. INSTRUMENT/SWITCHES/LIGHTS
INSTRUMENT
Instrument Bulbs Replacement
Remove the handlebar rear cover. ( 12-3)
Remove the bulbs and replace with new
ones.
SPEEDOMETER REMOVAL
Disconnect the speedometer cable.
Disconnect the speedometer wire
connector.
Remove the three screws attaching the
speedometer.
Remove the speedometer.
The installation sequence is the reverse of
removal.
HEADLIGHT
REMOVAL/BULB REPLACEMENT
Remove the handlebar front cover. ( 12-3)
Remove the bulb sockets and bulbs.
• The model adopts krypton gas bulb.
When installing, do not directly touch
the bulb glass with fingers.
• Use bulbs of the same specifications
for replacement.
The installation sequence is the reverse of
removal.
ZX / SCOUT
Bulb Sockets
Speedometer cable
Bulb Sockets
16-8