KYMCO ZX/SCOUT 50 Service Manual page 79

8
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
Inspect the kick starter spindle and driven
gear forcing parts for wear or damage.
KICK STARTER INSTALLATION
Install the kick starter spindle bushing and
return spring onto the left crankcase cover.
If the hooks of the return spring can not
be installed properly, use a screw driver
to press them into their locations
respectively.
Properly install the kick starter driven gear
and friction spring as the figure shown.
8-5
Kick Starter Spindle Forcing Part
Kick Starter Driven Gear Forcing Part
Kick Starter Spindle
Friction Spring
Kick Starter Driven Gear
ZX / SCOUT
Return Spring