Steering Handlebar - KYMCO ZX/SCOUT 50 Service Manual

13. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK

STEERING HANDLEBAR

REMOVAL
Remove the handlebar front and rear covers.
( 12-3)
Remove two bolts attaching the left brake
lever holder.
Remove two bolts attaching the brake
master cylinder (disk brake) to the right
brake lever.
Remove the two right handlebar switch
housing bolts and separate the housing.
Disconnect the throttle cable and then
remove the throttle pipe from the handlebar.
Remove the handlebar lock nut to remove
the handlebar.
13-3
Brake Master Cylinder
Bolts
Bolts
Handlebar
INSTALLATION
ZX / SCOUT
Bolts
Throttle Cable
Throttle Pipe