KYMCO ZX/SCOUT 50 Service Manual page 72

7
. A.C. GENERATOR
Remove the A.C. generator flywheel using
the flywheel puller.
Remove the A.C. generator wire connector.
Remove the two pulser coil bolts and pulser
coil from the right crankcase.
Remove the pulser coil wire clamp from the
right crankcase.
Remove the two bolts attaching the A.C.
generator stator.
Be careful not to damage the
discon-nected wire.
A.C. GENERATOR INSTALLATION
Install the A.C. generator stator and pulser
coil wire clamp onto the right crankcase,
and then install the pulser coil.
ZX / SCOUT
Lock Nut Wrench
Flywheel Puller
A.C. Generator Wire Connector
Stator
Wire Clamp
Pulser Coil
7-4